Scanners Long Range Imagers - Barcode Scanner

Scanners Long Range Imagers - Barcode Scanner Light source 660 nm visible red LED Optical system 2048 pixel CCD (charge-coupled device) Depth of scan field 0-250 mm Scanning width 120 mm Scan speed 200 scans/sec Current - sleep mode 25 mA @ 5VDC Resolution 0.1mm (4mils) - Code 39,PCS=45 %, on contact Print contrast 30% or more Scanning angle Front: 60° ,Rear: 60° ,Yaw: 75° Decode capability Autodiscriminates all standard barcodes; other symbologies can be ordered optionally (2D Symbology for AS-8250) Cable - universal type Straight 2.3 m Beeper operation 7 tones or no beep Indicator Green LED Length 182 mm Cushion material Rubber Width-handle 26 mm Width-head 74 mm Depth-handle 51 mm Depth-head 35 mm Weight 150 g (cable not included) Cable - K/B wedge Straight 2.0 m Connector type RJ-45 phone jack connector Case material ABS plastic Shock resistance 0°C to 40°C (32°F to 104°F) Input voltage 5 VDC ± 0.25V Power - operating 900 mW Power - standby 500 mW Current - operating 180 mA @ 5 VDC Current - standby 100 mA @ 5 VDC DC transformers Class 2; 5VDC @ 450 mA Storage -40°C to 60°C (-40°F to 140°F) Humidity 5% to 90% relative humidity, non-condensing Light level Up to 80000 Lux Shock 1.5m drop onto concrete Programming method Manual (reading special barcode) DOS command through RS-232, Windows configuration program Contaminants Sealed to resist airborne particulate contaminants Program upgrade Enabled by build-in flash memory Programmable characteristics Code type selection, check digit selection Decoding option Transmitted character delay, Header selection, trailer selection, message suffix, good read beep tone and volume, scanner trigger selection Keyboard emulation type (intermessage delay, keyboard type and keyboard language).Serial interface type (ACK/NAK, Xon/Xoff, RTS/CTS, good read LED control, start/stop bits) Agency Listing CE, FCC, CCC, RoHS